Silikal Flooring Systems
Silikal System A
Thin Coating (MMA)
A thin coating presupposes that the substrate is very even and highly stable. Because of the low thickness of the layer, a thin coating is suitable for light to moderate stresses. If the anticipated stresses are greater, e. g. fork-lift truck traffic, thick top coats are preferred. The Silikal system A is an universal, rollable thin coating, 1 – 2 mm, smooth or slip-resistant, indoor use.
SUBSTRATE | PRIMING | MAIN COAT | DECORATIONS |
---|---|---|---|
Concrete Cement screed Asphalt Metal |
Silikal RU 727 (concrete, cement screed, asphalt)Silikal RU 727 + adhesion promotor Additiv M (tiles) |
Silikal RU727 + Filler QM (rollable) | Pigmented smooth Coloured flakes smooth Pigmented non-slip Coloured quarzt non-slip Coloured flakes slightly non-slip |
For information about data sheets please contact our sales department.
Silikal System B
Wet Areas (MMA)
Industrial floors in wet use occur predominantly in production facilities for the food industry. The choice of Silikal system to use varies according to the conditions, e. g. slip resistance and resistance to the relevant media such as water, grease and cleaning agents. The recommended total thickness of the coating is approx. 4 – 6 mm.
SUBSTRATE | PRIMING | MAIN COAT | DECORATIONS | ADDITIONAL ITEM |
---|---|---|---|---|
Concrete cement screed Ceramic tiles |
Silikal R 51 (concrete, cement screed)Silikal RU 727 + adhesion promotor Additiv M (tiles) |
Silikal R 61/SL approx. 3 mm Silikal R 61/SL approx. 5 mm |
Pigmented non-slip Coloured quartz non-slip |
Coving with Silikal HK 20 Scratch slurry with Silikal RV 368 |
For information about data sheets please contact our sales department.
Silikal System C
Dry Areas (MMA)
Industrial floors used dry are found predominantly in production facilities for the mechanical industry, in warehouses, retail areas and exhibition halls. The choice of Silikal system to use is determined by the conditions found in these areas. There are a number of decorative design options which allow visual as well as technical adaptation to the particular area. The recommended total thickness of the coating is approx. 2 – 4 mm.
SUBSTRATE | PRIMING | MAIN COAT | DECORATIONS | ADDITIONAL ITEM |
---|---|---|---|---|
Concrete Cement screed Asphalt Ceramic tiles |
Silikal R 51 (concrete, cement screed) Silikal RU 727 (Asphalt) Silikal RU 727 + adhesion promotor Additiv M (tiles) |
Silikal R 62/SV approx. 1-2 mm (moderate stresses) Silikal R62/SV approx. 3-4 mm (e.g. fork lift trucks and heavy rolling traffic) |
Pigmented smooth Coloured flakes slightly non-slip Coloured flakes smooth |
Scratch slurry with Silikal RV 368 |
For information about data sheets please contact our sales department.
Silikal System D
Heavy Duty, Refrigeration and Outdoor Areas (MMA)
In areas in which significant impact stresses are expected, in cold stores and outdoors where temperature influences vary sharply, coating materials such as SILIKAL® RV 368 resin which are designed to be impact-resistant and elastic should be used. Assuming that the coat is sufficiently thick, any sudden forces that occur can be better absorbed in this way. The recommended total thickness of the coating is approx. 5 – 7 mm ( 2 – 4 mm by request).
SUBSTRATE | PRIMING | MAIN COAT | DECORATIONS | ADDITIONAL ITEM |
---|---|---|---|---|
Concrete Cement screed Asphalt (indoors) Ceramic tiles Metal |
Silikal R 51 (concrete, cement screed) Silikal RU 727 (Asphalt) Silikal RU 727 + adhesion promotor Additiv M (tiles, metal) |
Silikal RV 368/SL approx. 2-4 mm Silikal RV 368/SL approx. 4-7 mm |
Pigmented smooth Coloured flakes smooth Pigmented non-slip Coloured quartz non-slip |
Flexible membrane with Silikal RV 368 Scratch slurry with Silikal RV 368 |
For information about data sheets please contact our sales department.