Silikal Coating Resins (MMA)

Silikal RH 65 Resin

Pack­ag­ing
25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, fast cur­ing MMA resin of very low vis­cos­i­ty for filler-rich in­door screeds.

Area of ap­pli­ca­tion
Si­likal RH 65 resin is used for in­door screeds of 5 – 20 mm on con­crete to equal­ize an un­even con­crete sur­face.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 < 50 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,97 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +30 C°
 Den­si­ty in the hard­ened state  Din 53 479 1,12 g/cm³
 Ul­ti­mate elon­ga­tion  Din 53 455 75 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal RH 61 Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, medi­um-vis­cos­i­ty 2-com­po­nent methacrylic resin of a slight­ly elas­ti­cized char­ac­ter.

Area of ap­pli­ca­tion
Self-lev­el­ling coat­ings sprin­kled with quartz sand or for smooth­able floor­ings with coloured quartz-sand, pre­dom­i­nant­ly in the food in­dus­try (wet areas), in coat thick­ness of 2 – 3 mm or 4 – 6 mm.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 260 – 320 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,99 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +35 C°
Den­si­ty in the hard­ened state Din 53 479 1,14 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 34 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal RH 61 HW Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, medi­um-vis­cos­i­ty 2-com­po­nent methacrylic resin of an elas­ti­cized char­ac­ter.

Area of ap­pli­ca­tion
As binder in the man­u­fac­ture of self-lev­el­ling coat­ings sprin­kled with quartz sand or smooth­able floor­ings with coloured quartz sand pre­dom­i­nant­ly in the food in­dus­try (wet areas, cold stor­age cells) or even out­doors in cer­tain con­di­tions, in coat thick­ness of 2 – 3 mm oder 4 – 6 mm.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 260 – 320 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,98 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +35 C°
Den­si­ty in the hard­ened state Din 53 479 1,12 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 43 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal R62 Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, medi­um-vis­cos­i­ty methacrylic resin with good flow prop­er­ties.

Area of ap­pli­ca­tion
Out­stand­ing­ly suit­able for self-lev­el­ling coat­ings of 1 – 4 mm, pre­dom­i­nant­ly in­doors or as top coat for elas­tic floor­ings out­doors.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 150 – 180 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,98 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +35 C°
Den­si­ty in the hard­ened state Din 53 479 1,13 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 32 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal RV 368 Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, 2-com­po­nent methacrylic resin of high im­pact re­sis­tance and low-tem­per­a­ture flex­i­bil­i­ty for in­door and out­door ap­pli­ca­tion. Coat­ings made from Si­likal RV 368 are durably elas­tic and able to crack bridg­ing.

Area of ap­pli­ca­tion
Binder for self-lev­el­ling coat­ings char­ac­ter­ized by out­stand­ing im­pact re­sis­tance, pre­dom­i­nant­ly out­doors and for cold stores in thick­ness of 2 – 4 mm or 4 – 7 mm. When com­bined with fine filler, Si­likal RV 368 can also be used as 1 – 1.5 mm mem­brane un­der­neath nor­mal floor­ing sys­tems of Si­likal R 61, Si­likal R 62 or Si­likal RV 368.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 1.000 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,98 g/cm³
Ap­pli­ca­tion tem­per­a­ture +5 C° to +30 C°
Den­si­ty in the hard­ened state Din 53 479 1,12 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 120 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal RU 320 Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Mod­i­fied methacrylic resin of high elas­tic­i­ty. It en­sures last­ing ex­ten­si­bil­i­ty so that move­ments in the sub­strate can be bet­ter ab­sorbed.

Area of ap­pli­ca­tion
For the man­u­fac­ture of mem­brane lay­ers and wa­ter­proof­ing on sub­strates made from con­crete.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 2000 – 3000 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,99 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +30 C°

 

DOWNLOAD DATA SHEET
DOWNLOAD SAFETY DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal R63 Resin (AgBB)

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Sol­vent-free, medi­um-vis­cos­i­ty methacrylic resin with good flow prop­er­ties.

Area of ap­pli­ca­tion
Out­stand­ing­ly suit­able for self-lev­el­ling coat­ings of 1 – 4 mm, pre­dom­i­nant­ly in­doors or as top coat for elas­tic floor­ings out­doors.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 150 – 180 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,98 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +35 C°
Den­si­ty in the hard­ened state Din 53 479 1,13 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 32 %

 

For information about safety data sheets please contact our sales department.

Silikal RU 727 Resin

Pack­ag­ing
5.3 kg, 21.2 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Low-vis­cos­i­ty, trans­par­ent, sol­vent-free 3-com­po­nent methacrylic resin for thin coat­ings.

Area of ap­pli­ca­tion
Uni­ver­sal resin for roller-ap­plied thin coat­ings and coloured seal­ing.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity Din 53 015 170 – 220 mPa s
Den­si­ty as de­liv­ered Din 51 757 0,99 g/cm³
Ap­pli­ca­tion tem­per­a­ture 0 C° to +35 C°
Den­si­ty in the hard­ened state Din 53 479 1,16 g/cm³
Ul­ti­mate elon­ga­tion Din 53 455 28 %

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.

Silikal R69 C Resin

Pack­ag­ing
5 kg, 25 kg can­is­ter, 180 kg drum

Prod­uct de­scrip­tion
Medium-viscosity methacrylic resin being used as a decor looring system on top of unicoloured Silikal self-leveling coatings. In combination with the corresponding iller SILIKAL® Filler CL, SILIKAL® R 69 C resin is applied in thickness of 1 to 1.5 mm. SILIKAL® R 69 C resin is certiied to AgBB assessment scheme.

Area of ap­pli­ca­tion
SILIKAL® R 69 C resin is used as a binder in manufacturing decor-loorings. A mixture of SILIKAL® R 69 C resin and SILIKAL® Filler CL is prepared and applied on top of the already prepared, unicoloured self-leveling coating based on SILIKAL® R 63 resin (alternatively SILIKAL® R 62 resin). The recommended base-colour of the looring should match approx. RAL 7023 or RAL 7030.

PROPERTY MEASURING METHOD APROX. VALUE
Viscosity at +20 °C Din 53 015 350 – 500 mPa s
Flow time at +20 °C, 4 mm Din 53 211 58 – 70 sec.
Density  EN ISO 2811-2 0,98 g/cm³
Pot life at +20 °C (100 g, 2 % pbw. hardening powder) 12 – 15 min.
Application temperature +10 C° bis +30 C°
Flash point  Din 51 755 +10 °C

 

DOWNLOAD DATA SHEET

For information about safety data sheets please contact our sales department.